Doç. Dr.
ERTUĞRUL TOLGA DURAN

D BLOK 2.KAT 206

+90 (212) 533 65 32 / 1341

[email protected]

Eğitim

Doktora

SABANCI ÜNİVERSİTESİ
Mekatronik Mühendisliği

Yüksek Lisans

SABANCI ÜNİVERSİTESİ
Elektronik-Bilgisayar Mühendisliği

Lisans

İSTANBUL TEKNİK ÜNİVERSİTESİ
Makine Mühendisliği

Araştırma Alanları

Sonlu Elemanlar Analizleri ve Uygulamalar
Benzinli ve Ağır Dizel Motorlar
Havacılık Pistonlu Motorları
Güç Grubu Dayanım, Gürültü-Titreşim
Turbomakinalar
Türbin ve Kompresörler için Kaçak Akış Performans Teknolojileri
Yorulma

İş Deneyimi

2025 / Kadir Has Üniversitesi
Doçent Dr

2023 / 2025 BMC Power
Chief Design Officer

İdari Görevler

Görev Adı	Görev Yeri	Başlangıç tarihi	Bitiş Tarihi
Proje Yürütücüsü	117G004, TLM16V185 Tipi Ağır Dizel Motorunun Modernizasyonu	15.12.2018	15.03.2019
Proje Yürütücüsü	113G096, E Sınıfı 130 MW Bir Gaz Türbininde 1 Ser Rotor ve 1 Set Stator 3. Kademe Türbin Kanadının Hassas Döküm Yöntemi ile Geliştirilmesi ve Üretilmesi, KAMAG	01.05.2014	19.03.2020

Yayınlar

"Torsional Fatigue Performance of a Spot-Welded Structure: An XFEM Analysis",
Demiral, Murat; Duran, Ertugrul Tolga; , Applied Sciences Switzerland, (2024) Vol.14, No.20, DOI: 10.3390/app14209593
"Torsional Fatigue Performance of a Spot-Welded Structure: An XFEM Analysis",
Duran, Ertuğrul Tolga; Demiral, Murat; , Applied Sciences, (2024) DOI: https://doi.org/10.3390/app14209593
"Comparing and Validating the Numerical Modeling of Spot-welded Fatigue Failure using FEM and XFEM Methods for HCF",
Duran, Ertuğrul Tolga; Demiral, Murat; , Engineering Failure Analysis, (2024) DOI: https://doi.org/10.1016/j.engfailanal.2024.108049
"Failure Analysis of Resistance Spot-Welded Structure Using XFEM: Lifetime Assessment",
Demiral, Murat; Duran, Ertugrul Tolga; , Applied Sciences Switzerland, (2023) Vol.13, No.19, DOI: 10.3390/app131910923
"Effect of Refrigerated Inlet Cooling on Greenhouse Gas Emissions for a 250 MW Class Gas Turbine Engine",
Dinc, Ali; Mamedov, Ali; Duran, Ertugrul Tolga; Abbassi, Fethi; Elbadawy, Ibrahim; Nag, Kaushik; Moayyedian, Mehdi; Fayed, Mohamed; Otkur, Murat; Gharbia, Yousef; , Aerospace, (2023) Vol.10, No.10, DOI: 10.3390/aerospace10100833
"Methodology for Counter Torque, Power Loss, and Frictional Heat for Brush Seals Under Eccentric Transients",
Duran, Ertugrul Tolga; , Tribology Transactions, (2023) Vol.66, No.2, 249-267 DOI: 10.1080/10402004.2023.2167677
"Failure Analysis of Resistance Spot-Welded Structure Using XFEM: Lifetime Assessment",
Duran, Ertuğrul Tolga; Demiral, Murat; , Applied Sciences, (2023) DOI: https://doi.org/10.3390/app131910923
"Effect of Refrigerated Inlet Cooling on Greenhouse Gas Emissions for a 250 MW Class Gas Turbine Engine",
Duran, Ertuğrul Tolga; Dinç, Ali ; Mamedov, Ali ; Abbassi, Fethi; Elbadawy, Ibrahim; Nag, Kaushik; Moayyedian, Mehdi; Fayed, Mohammad; Ötkür, Murat; , Aerospace, (2023) DOI: https://doi.org/10.3390/aerospace10100833
"Methodology for Counter Torque, Power Loss and Frictional Heat for Brush Seals under Eccentric Transients",
Duran, Ertuğrul Tolga; , Tribology Transactions, (2023) DOI: https://doi.org/10.1080/10402004.2023.2167677
"Seal for Combustion Apparatus, 2021/11/3, WO 2021/043527 A1",
Duran, Ertuğrul Tolga; Raben, Markus; Kunyuan, Zhou; , US11746667B2, (2023)
"Comparative Multi-Axial High-Cycle Fatigue Analysis of Spot Weld Models Using Findley's Damage Criteria",
Duran, Ertugrul Tolga; , SAE International Journal of Materials and Manufacturing, (2022) Vol.16, No.1, DOI: 10.4271/05-16-01-0006
"Operational Modal Analyses of Brush Seals and Seating Load Simulations",
Duran, Ertuǧrul Tolga; , Journal of Engineering for Gas Turbines and Power, (2022) Vol.144, No.7, DOI: 10.1115/1.4053964
"Brush seal contact force theory and correlation with tests",
Duran, Ertuğrul Tolga; , Alexandria Engineering Journal, (2022) Vol.61, No.4, 2925-2938 DOI: 10.1016/j.aej.2021.08.027
"Finite element based Multi-Axial low cycle fatigue analyses of Spot-Welded components and correlation with tests",
Duran, Ertuğrul Tolga; , Engineering Failure Analysis, (2022) Vol.132, DOI: 10.1016/j.engfailanal.2021.105899
"Effect of Load Distribution Modeling on the Accuracy of Spot Weld Analyses",
Duran, Ertu rul Tolga; , SAE Technical Papers, (2022) DOI: 10.4271/2022-01-0776
"Sensitivity of Solid Element Spot Weld Modeling Methodology to Nugget Diameter",
Duran, Ertugrul Tolga; , SAE Technical Papers, (2022) DOI: 10.4271/2022-01-0777
"EFFECT OF BRISTLE DIAMETER ON OPERATIONAL MODAL ASSESSMENT AND SEATING LOAD OF BRUSH SEALS",
Duran, Ertuğrul Tolga; , Proceedings of the ASME Turbo Expo, (2022) Vol.8-A, DOI: 10.1115/GT2022-78289
"Comparative Multi-Axial High-Cycle Fatigue Analysis of Spot Weld Models Using Findley’s Damage Criteria",
Duran, Ertuğrul Tolga; , Int. J. Mater. Manf. , (2022) DOI: https://doi.org/10.4271/05-16-01-0006
"Effect of 3D and 2D Element Types on Stress and Life Analysis of Spot-Welded Components",
Duran, Ertuğrul Tolga; , Journal of Engineering Sciences, (2022) DOI: doi:10.5505/pajes.2022.35853
"Effect of Bristle Diameter on Operational Modal Assessment and Seating Load of Brush Seals",
Duran, Ertuğrul Tolga; , ASME Turbo Expo, (2022) DOI: https://doi.org/10.1115/GT2022-78289
"Operational Modal Analyses of Brush Seals and Seating Load Simulations",
Duran, Ertuğrul Tolga; , ASME. J. Eng. Gas Turbines and Power, (2022) DOI: https://doi.org/10.1115/1.4053964
"Effect of Load Distribution Modeling on the Accuracy of Spot Weld Analyses",
Duran, Ertuğrul Tolga; , WCX World Congress, (2022) DOI: https://doi.org/10.4271/2022-01-0776
"Sensitivity of Solid Element Spot Weld Modeling Methodology to Nugget Diameter",
Duran, Ertuğrul Tolga; , SAE Int. J. Adv. & Curr. Prac. in Mobility , (2022) DOI: https://doi.org/10.4271/2022-01-0777
"Finite Element Based Multi-Axial Low Cycle Fatigue Analyses of Spot-Welded Components and Correlation with Tests",
Duran, Ertuğrul Tolga; , Engineering Failure Analysis, (2021) DOI: https://doi.org/10.1016/j.engfailanal.2021.105899
"Brush Seal Contact Force Theory and Correlation with Tests",
Duran, Ertuğrul Tolga; , Alexandria Engineering Journal, (2021) DOI: https://doi.org/10.1016/j.aej.2021.08.027
"Rotor Including Replaceable Self-Locking Sealing Assembly, Turbine, and Gas Turbine Including the Same",
Duran, Ertuğrul Tolga; , US 2021/0108566 A1, (2021)
"Oil Brush Seals in Turbomachinery: Flow Analyses and Closed-Form Solutions",
Duran, Ertuǧrul Tolga; , Journal of Engineering for Gas Turbines and Power, (2020) Vol.142, No.10, DOI: 10.1115/1.4048327
"Oil Brush Seal in Turbomachinery: Flow Analyses and Closed Form Solutions",
Duran, Ertuğrul Tolga; , ASME Journal of Engineering for Gas Turbines and Power, (2020) DOI: https://doi.org/10.1115/1.4048327
"Woven Cloth Layer Supported Leaf Seal",
Duran, Ertuğrul Tolga; , US20200248812A1, WO 2019/083475 A2., (2020)
"Brush Seal Structural Analysis and Correlation With Tests for Turbine Conditions",
Tolga Duran, E.; Aksit, Mahmut F.; Ozmusul, Murat; , Journal of Engineering for Gas Turbines and Power, (2016) Vol.138, No.5, DOI: 10.1115/1.4031565
"Gaz Türbinli Motorlar için Sızdırmazlık Elemanları Test Sistemi Tasarımı ve Validasyonu",
Duran, Ertuğrul Tolga; Doğu, Yahya; Kocagül, Mustafa; Sertçakan, Mustafa; Özmusul, Murat; , UHUK, (2016)
"Brush seal structural analysis and correlation with tests for turbine conditions",
Duran, E. Tolga; Aksit, Mahmut F.; Ozmusul, Murat; , Proceedings of the ASME Turbo Expo, (2015) Vol.5C, DOI: 10.1115/GT2015-44067
"CAE based brush seal characterization for stiffness and stress levels",
Duran, E. Tolga; Aksit, Mahmut F.; Ozmusul, Murat; , Proceedings of the ASME Turbo Expo, (2015) Vol.5C, DOI: 10.1115/GT2015-44068
"Brush seal free state stiffness analyses, tests and inspection on dynamic effects",
Duran, E. Tolga; Aksit, Mahmut F.; Ozmusul, Murat; , Proceedings of the ASME Turbo Expo, (2015) Vol.5C, DOI: 10.1115/GT2015-44069
"Brush Seal Structural Analyses and Correlation with Tests for Turbine Conditions",
Duran, Ertuğrul Tolga; Akşit, Mahmut; Özmusul, Murat; , ASME Journal of Engineering for Gas Turbines and Power, (2015) DOI: https://doi.org/10.1115/1.4031565
"Brush Seal Structural Analyses and Correlation with Tests for Turbine Conditions",
Duran, Ertuğrul Tolga; Akşit, Mahmut ; Özmusul, Murat; , ASME Turbo Expo , (2015) DOI: https://doi.org/10.1115/GT2015-44067
"Brush Seal Free State Stiffness Analyses, Tests and Inspection on Dynamic Effects",
Duran, Ertuğrul Tolga; Akşit, Mahmut; Özmusul, Murat; , ASME Turbo Expo , (2015) DOI: https://doi.org/10.1115/GT2015-44069
"CAE Based Brush Seal Characterization for Stiffness and Stress Levels",
Duran, Ertuğrul Tolga; , ASME Turbo Expo , (2015) DOI: https://doi.org/10.1115/GT2015-44068
"Power train nvh analysis with excite in a four cylinder inline engine by including crankshaft dynamics and flywheel swirl",
Duran, E. Tolga; Braumueller, Dirk; , ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis Esda2010, (2010) Vol.3, 139-146 DOI: 10.1115/ESDA2010-24608
"Shear Heat Included Hydrodynamic Lift Clearance Derivation for Brush Seals",
Duran, Ertuğrul Tolga; Akşit, Mahmut; , STLE, (2010)
"Power Train NVH Analysis with Excite in a Four Cylinder Inline Engine by Including Crankshaft Dynamics and Flywheel Swirl",
Duran, Ertuğrul Tolga; Braumueller, Dirk; , Engineering System Design and Analysis, (2010) DOI: https://doi.org/10.1115/ESDA2010-24608
"A study on the diesel engine crankshaft fatigue performance optimization",
Çevik, Gül; Tuncali, Zafer; Duran, E. Tolga; , SAE Technical Papers, (2009) DOI: 10.4271/2009-01-0261
"Oil temperature analysis of brush seals",
Duran, E. Tolga; Aksit, Mahmut F.; Dogu, Yahya; , 2007 Proceedings of the ASME STLE International Joint Tribology Conference Ijtc 2007, (2008) Vol.PART A, 481-483 DOI: 10.1115/IJTC2007-44397
"Puma I5 diesel engine oil pan assembly NVH optimization with optistruct and AVL-excite",
Tolga Duran, E.; Çagri Sever, A.; , SAE Technical Papers, (2008) DOI: 10.4271/2008-01-2721
"A study of brush seal oil pressure profile including temperature-viscosity effects",
Duran, E. Tolga; Aksit, Mahmut F.; , 44th AIAA ASME SAE ASEE Joint Propulsion Conference and Exhibit, (2008) DOI: 10.2514/6.2008-4622
"Dynamic simulation and endurance limit safety factor calculation for crankshaft-comparison of single mass and dual mass flywheel",
Tolga Duran, E.; Çaǧri Sever, A.; , SAE Technical Papers, (2008) DOI: 10.4271/2008-01-2622
"Effect of shear heat on hydrodynamic lift of brush seals in oil sealing",
Duran, E. Tolga; Aksit, Mahmut F.; Dogu, Yahya; , Collection of Technical Papers AIAA ASME SAE ASEE 42nd Joint Propulsion Conference, (2006) Vol.6, 4349-4362
"A comparative study on the finite element models for spot welds and their verification",
Dinçer, Simge; Çinar, Ali; Kepenek, Dursun A.; Aśureciler, Burak; Duran, Ertuǧrul T.; Muǧan, Ata; , SAE Technical Papers, (2006) DOI: 10.4271/2006-01-0590

Projeler

Proje Adı	Görevi	Proje Türü	Fonlayan Kuruluş	Başlangıç Tarihi	Bitiş Tarihi

Verilen Dersler

Ders Adı	Ders Kodu	Dönem
Robot Tasarım Projesi	MTE491	2025/26 Güz
Malzemeler	FENS203	2025/26 Güz

Doç. Dr. ERTUĞRUL TOLGA DURAN